Mar 10, 2014 · Treated plywood may make the wood less prone to damage from water, but it won't stop water from swelling the wood. I'd put at least two coats of polyurethane on the flat surfaces and 4 …

Nov 12, 2015 · your boat never touchs the wood I used treated three years back see problem. and heavy duty carpet made for bunks, got it on e bay.

Apr 15, 2011 · I'm replacing the wood transom board on my Sea Nymph and unsure of what type of wood is best to use. I've heard pressure treated.. then I heard pressure treated is bad on alluminum? …

Jun 16, 2015 · Including replacing the transom wood, building the floor and platforms etc. ...forgot to add...DO NOT USE PRESSURE TREATED WOOD . The chemicals used to treat the wood will eat …

Mar 19, 2013 · Another possibility could be from the hull being made from treated wood ( not as likely). I would look into the transom further see if it needs to be replaced since there has been water …

Apr 12, 2006 · I would think the floor would have to be thicker than the hull because a big butted foot would exert much more pressure than water. The hull is also supported along 4 edges. My …

Jan 20, 2020 · I posted this in another thread, didn't want to derail that topic. I figure someone has gone this route before. I want to redo the carpet in a Smokercraft ProAngler cockpit area. I was originally …

Jan 15, 2014 · You would definitely want to use marine grade if the wood itself is going to be the finished surface (not covered with carpet/vinyl) or if you're building an actual boat out of it. - Pressure-treated …

Jan 10, 2017 · Pretty easy work, and didn't need another person to help with bucking like traditional rivets. 2. Replaced the transom wood with two sheets of oak plywood. I glued them together with …

Nov 18, 2017 · Note do not use treated wood as when treated with chromate copper arsenate (CCA), it will corrode aluminum when wet. As you do electrical, make sure you understand DC vs AC wiring …